What to Do Before Hiring Employees: 12-Step Checklist
A 12-step employer checklist covering role design, budget, compliance, and onboarding prep.

Save articles to read later and create your own reading list.

What to do before hiring employees comes down to twelve concrete steps:define the role and its outcomescard, and prepare onboarding — all before the job post goes live. Skipping this groundwork is how employers end up with expensive mis-hires and chaotic first weeks. This guide walks through each step in order.
- Most hiring failures trace back to unclear roles and rushed preparation, not bad candidates.
- Budget 1.25x to 1.4x base salary for the fully loaded cost of an employee.
- Compliance setup (I-9, payroll, workers comp) must exist before day one, not after.
- Build the interview scorecard before sourcing a single applicant.
- A written 30-60-90 day plan turns a new hire into a productive one faster.
Key Takeaways
- Most hiring failures trace back to unclear roles and rushed preparation, not bad candidates.
- Budget 1.25x to 1.4x base salary for the fully loaded cost of an employee.
- Compliance setup (I-9, payroll, workers comp) must exist before day one, not after.
- Build the interview scorecard before sourcing a single applicant.
- A written 30-60-90 day plan turns a new hire into a productive one faster.
Why Most Hiring Mistakes Happen Before the Job Post Goes Live
Most hiring mistakes happen before the job post goes live because employers confuse urgency with readiness. When a role feels urgent, it is tempting to write a vague description, post it everywhere, and hope the right person appears. The result is predictable: mismatched expectations, slow decisions, and offers that fall apart.
A pre-hire checklist for employers forces the uncomfortable questions up front. What will this person actually own? What does success look like at 90 days? Can the business afford them if revenue dips? Hiring readiness is less about recruiting skill and more about operational discipline.
Think of it this way: the job post is the starting gun, not the preparation. Everything below happens before you spend a dollar on sourcing.
What to Do Before Hiring Employees: Define the Role, Outcomes, and Success Metrics
Before you hire your first employee, write down the role as a set of outcomes, not a list of tasks. A role definition is a one-page document stating who the person reports to, what they own, and how their success will be measured in the first 90 days.
Step 1: Write the outcome statement
Complete this sentence: "In the first 90 days, this person will have delivered ___." If you cannot finish it, the role is not ready to post. Vague outcomes like "help with marketing" produce vague candidates and vague performance reviews.
Step 2: Separate must-haves from nice-to-haves
List three to five must-have skills and mark everything else as optional. Long wish lists shrink your applicant pool and screen out strong generalists who could grow into the role.
Step 3: Define success metrics
Pick two or three measurable indicators:deals closed. These become the backbone of your interview scorecard and your 30-60-90 day plan.
Budget the True Cost:Salary
The true cost of an employee is typically 1.25x to 1.4x their base salary once you add payroll taxes. This is a widely used planning estimate, not a fixed rule — your actual multiplier depends on benefits and location.
| Cost component | What to include | Planning note |
|---|---|---|
| Base salary or hourly wage | Market rate for role and region | Benchmark with at least two salary sources |
| Payroll taxes | Employer share of Social Security, Medicare, unemployment | Roughly 7.65% for FICA alone in the US |
| Benefits | Health | Often 20-30% of salary if offered |
| Tools and equipment | Laptop, software seats, workspace | Easy to underestimate; list every seat |
| Ramp time | Weeks to full productivity | Plan for 30-90 days of reduced output |
Before you post, confirm the hire is affordable for at least six months even if revenue stays flat. A hire you cannot sustain is worse than a role left open.

Legal and Compliance Setup:I-9
Employer hiring preparation legally requires three things before day one: employment eligibility verification (Form I-9 in the US), a working payroll setup with tax withholding, and workers compensation coverage where required. Miss any of these and you risk penalties that dwarf the cost of doing it right.
Step 4: Get your employer identification and registrations
In the US, you need an Employer Identification Number (EIN) from the IRS, state employer registration, and state new-hire reporting. Requirements vary by state and country, so confirm specifics with your state labor agency or a qualified advisor.
Step 5: Set up payroll and classification
Decide employee versus contractor carefully — misclassification is a common and costly error. Choose a payroll provider or accountant before the offer letter goes out.
Step 6: Workers comp, insurance, and policies
Most states require workers compensation once you have employees. Draft a basic employee handbook covering PTO. Keep it short; a clear two-page policy beats a bloated one nobody reads.
Build the Interview Loop and Scorecard Before Sourcing
A hiring readiness checklist is incomplete without an interview loop and scorecard built in advance. Structured interviews — the same questions, scored against the same rubric for every candidate — are consistently recommended by HR practitioners as more reliable than unstructured chats.
Step 7: Design the loop
Keep it lean: a screen, one skills exercise or work sample, and a final conversation. Three stages are enough for most small-business roles. Assign each interviewer a focus area so you are not all asking the same questions.
Step 8: Write the scorecard
Score each must-have skill from 1 to 4 with behavioral anchors. Decide your pass threshold before interviews begin. This single step eliminates most gut-feel decisions and makes debriefs fast and fair.
Step 9: Prepare the work sample
A short, paid-or-unpaid task mirroring real work — a sample email, a mock support ticket, a small analysis — predicts performance better than hypotheticals. Keep it under two hours and respect candidates' time.

The 12-Step Pre-Hire Checklist for Employers
Here is the full sequence, in order. Treat it as a gate: do not post the role until every box is checked.
- Write the 90-day outcome statement for the role.
- List three to five must-have skills; mark the rest optional.
- Define two or three measurable success metrics.
- Benchmark salary and calculate the fully loaded cost.
- Confirm six months of runway for the role.
- Register for EIN, state employer accounts, and new-hire reporting.
- Set up payroll, withholding, and employee classification.
- Secure workers compensation and required insurance.
- Draft a short employee handbook and offer letter template.
- Build the interview loop, scorecard, and work sample.
- Write the job description from the outcome statement, not a wish list.
- Prepare the 30-60-90 day onboarding plan and equipment.
Post the Role and Track Applicants in One Place
Once the checklist is complete, post the role where your target candidates actually look, and track every applicant in one system. Scattered inboxes and spreadsheets are where good candidates get lost and follow-ups slip.
The GoWithFund Hiring & Jobs board lets employers publish roles and manage applicants in one place, which pairs naturally with the scorecard and checklist above. Use it to keep stages, notes, and decisions organized from first application to signed offer.
Whatever tool you use, commit to a response time — even a templated rejection within a week protects your employer reputation. Candidates talk, and small businesses live on referrals.
💡 Related Guide: Read our comprehensive analysis on Job Portal: Technical Hiring Framework & Sourcing Guide for actionable benchmarks and proven strategies. 💡 Recommended Reading: Explore What to Do Before Hiring Employees: 12-Step Checklist for in-depth insights.
📚 Topic Cluster: Explore all verified Hiring & Jobs guides and frameworks in our resource hub.
Frequently asked questions
Define the role's 90-day outcomes, budget the fully loaded cost (roughly 1.25x to 1.4x salary), and set up payroll, I-9 verification, and workers compensation. Then build your interview scorecard and onboarding plan before posting the job.
Plan for 1.25x to 1.4x base salary once you add employer payroll taxes, benefits, equipment, software, and ramp time. The exact multiplier varies by benefits offered and location, so build your own estimate rather than relying on a single figure.
Yes, in the US you generally need an Employer Identification Number from the IRS before running payroll. You will also need state employer registration and must report new hires to your state agency, typically within 20 days.
A hiring readiness checklist is a pre-posting sequence covering role definition, budget, compliance, interview design, and onboarding prep. It ensures the business is operationally and legally ready before spending money or time on sourcing candidates.
For a first-time employer, expect one to three weeks to complete compliance setup, payroll, and interview design. Rushing this phase to fill a seat faster usually costs more in mis-hires and rework than it saves.
For most small-business roles, a job board plus a structured referral push is enough and far cheaper than agency fees, which often run a percentage of first-year salary. Use a recruiter only for specialized or senior roles where sourcing is genuinely hard.
Unlike Upwork and Fiverr, which charge freelancers 10% to 20% platform commissions and impose strict client communication restrictions, GoWithFund charges a 0% platform fee. Independent contractors keep 100% of their billings minus standard Stripe payment processing (2.9% + $0.30).
GoWithFund integrates with Stripe Connect, enabling freelancers to accept global credit cards, debit cards, and bank transfers, with automated bank payouts deposited directly within 1 to 2 business days.
Yes. GoWithFund does not restrict off-platform communication or penalize freelancers for exchanging direct contact details, contract paperwork, or external collaboration links.
Every profile automatically generates structured Schema.org Person and ProfessionalService metadata, ensuring your specialized skill sets, portfolio items, and client reviews index prominently in Google Search.
No. GoWithFund charges $0 in monthly subscription fees and has no paid bidding tokens or proposal credits. Freelancers can connect with clients with zero fixed monthly overhead.
Contractors can create phased milestones with clearly defined deliverables, acceptance criteria, and deposit schedules to protect against scope creep and guarantee timely disbursements.
Position deliverables around business outcomes rather than hours worked, package recurring monthly maintenance or advisory scopes, and offer established clients transparent monthly retainers via automated Stripe billing.
Transactions are secured via Stripe Connect escrow protocols with encrypted payment tokenization. In the rare event of a dispute, comprehensive milestone documentation and deliverable logs provide clear resolution evidence.

GoWithFund Editorial Team
Staff Contributor
Published on behalf of GoWithFund Inc., a registered U.S. 501(c)(3) tax-exempt public charity in Idaho (EIN: 33-1243835 | Idaho SOS #5902503). Articles are reviewed for statutory compliance under IRS Internal Revenue Code Section 170.
Related Topics
Put these Hiring & Jobs solutions into practice
Launch your initiative, access verified tools, and streamline your operations with 0% platform fee infrastructure.
Related Articles

Job Portal: Technical Hiring Framework & Sourcing Guide
Modern recruiting playbook: structured candidate evaluation, compensation benchmarks, and team scaling for job portal guide dxb with verified 0% platform.
GoWithFund Support
Director, GoWithFund Inc.

What to Do Before Hiring Employees: 12-Step Checklist
A 12-step readiness checklist covering budget, role scope, compliance, and sourcing for small teams.

GoWithFund Editorial Team
Staff Contributor

Job Portal: Technical Hiring Framework & Sourcing Guide
Modern recruiting playbook: structured candidate evaluation, compensation benchmarks, and team scaling for job portal guide 8dw with verified 0% platform.
GoWithFund Support
Director, GoWithFund Inc.
